Mikro tik wAP ac a small dual-band weatherproof wireless access point

Strong dual-chain dual-band 2.4/5 GHz wireless for concurrent coverage will solve most interference issues in a crowded environment. This is a must-have these days! You can use the 2.4 GHz channel for older devices and the 5 GHz channel for everything else since this frequency is less cluttered.

The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw, which can only be opened by the owner.

There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP ac attracts less attention and blends into any environment.It looks unobtrusive and sleek, available in two colors - black (RBwAPG-5HacD2HnD-BE) and white (RBwAPG-5HacD2HnD).

Specifications
Product code :RBwAPG-5HacD2HnD
Architecture :ARM 32bit
CPU :IPQ-4018
CPU core count: 4
CPU nominal frequency :auto MHz
Dimensions :185 x 85 x 30 mm
RouterOS license :4
Operating System :RouterOS
Size of RAM :128 MB
Storage size :16 MB
Storage type :FLASH
MTBF :Approximately 100'000 hours at 25C
Tested ambient temperature :-40°C to 70°C
IPsec hardware acceleration :Yes

Wireless capabilities
Wireless 2.4 GHz Max data rate: 300 Mbit/s
Wireless 2.4 GHz number of chains: 2
Wireless 2.4 GHz standards :802.11b/g/n
Antenna gain dBi for 2.4 GHz: 2.5
Wireless 2.4 GHz chip model: IPQ-4018
Wireless 2.4 GHz generation :Wi-Fi 4
Wireless 5 GHz Max data rate :867 Mbit/s
Wireless 5 GHz number of chains: 2
Wireless 5 GHz standards :802.11a/n/ac
Antenna gain dBi for 5 GHz :2.5
Wireless 5 GHz chip model :IPQ-4018
Wireless 5 GHz generation: Wi-Fi 5
AC speed :AC1200

Powering
Number of DC inputs :2 (PoE-IN, DC jack)
DC jack input Voltage :10-57 V
Max power consumption :10 W
Max power consumption without attachments: 9 W
FAN count :Passive
PoE in :802.3af/at
PoE in input Voltage :18-57 V